Short sunday ...................

Just a few hours today forging on ...
Managed to correct the wiper blade angle by a combination of repositioning the rubbers and a gentle tweak of the wiper arms. The blades are now much more parallel to the windscreen and appear to do an acceptable job. We drilled the holes for the shoulder harness and fitted the eyed bolts I am not sure as they are too short will do some reading. We ran the engine again all appears well but am not convinced the water temperature gauge is working, although it could be we did not get it hot enough. The idle is very rough but will just about keep going when the engine has warmed up. We cleaned out the interior ready for seats and carpets and fitted the rubber gaiters to handbrake and gearlever. 3 hours today 243 hours total. My better half was rejoicing as her dining room appeared from under a pile of parts, they may have to move back in yet but I won't spoil it for her for now!

Running with drl on.

Front (after IVA)

Not too much longer !